F2 Match
3D printer for printing large-sized products
using FDM/FFF and FGF technologies.
- PELLET OR FILAMENTS PRINTING
- CLOSED CHAMBER WITHOUT HEATING
using FDM/FFF and FGF technologies.
- PELLET OR FILAMENTS PRINTING
- CLOSED CHAMBER WITHOUT HEATING
F2 Match
F2 Match
3D printer for printing large-sized products using FDM/FFF and FGF technologies.
Large-scale printing with granules
or filament.
Nothing extra.
or filament.
Nothing extra.
F2 Match
Print with pellets or filament
Large-size printer that combines two printing technologies. The printer has a closed chamber without heating (printing area 1000*1000*1000 mm).
Access to the print chamber and unloading of the part is possible from three sides of the printer.
Access to the print chamber and unloading of the part is possible from three sides of the printer.
In FDM/FFF version:
two high-temperature independent extruders for printing using the IDEX system with a heating temperature of up to 550°C and a high accuracy in maintaining the melt temperature (up to 3°C).
two high-temperature independent extruders for printing using the IDEX system with a heating temperature of up to 550°C and a high accuracy in maintaining the melt temperature (up to 3°C).
In FGF version:
the technology of three-zone heating of pellets inside the extruder ensures uniform material feed and high quality of the printed item. This technology is suitable for creating disposable molds, punches, dies for laying out composites.
the technology of three-zone heating of pellets inside the extruder ensures uniform material feed and high quality of the printed item. This technology is suitable for creating disposable molds, punches, dies for laying out composites.
Diameter of nozzles
FGF - 1 / 1,5 / 3 / 5 / 8 mm
FFF - 0,4 / 0,6 / 0,8 / 1 m
FFF - 0,4 / 0,6 / 0,8 / 1 m
Extruders
FGF - pellet (up to 500°С)
FDM/FFF - one or two high temperature (up to 550°C)
FDM/FFF - one or two high temperature (up to 550°C)
Chamber
closed, without heating
Printing area
1000*1000*1000 mm
Heated bed
quick-change printing platform heated to 100°С
User Interface
original electronics and intuitive interface
User Interface
Original electronics and intuitive interface
Minimal training is required; by looking at the interface, you will immediately understand how to operate the printer.
User Interface
Original electronics and intuitive interface
Minimal training is required; by looking at the interface, you will immediately understand how to operate the printer.
PRINTING CHAMBER
Closed chamber without heating
Access to the print chamber and unloading of the part is possible from three sides of the printer.
PRINTING CHAMBER
Closed chamber without heating
Access to the print chamber and unloading of the part is possible from three sides of the printer.
EXTRUDERS IN FDM/FFF VERSION
Two high-temperature extruders
Extruders with heating up to 550°C.
F2 Match has two independent extruders for printing using the IDEX system.
F2 Match has two independent extruders for printing using the IDEX system.
EXTRUDERS IN FDM/FFF VERSION
Two high-temperature extruders
Extruders with heating up to 550°C.
F2 Match has two independent extruders for printing using the IDEX system.
F2 Match has two independent extruders for printing using the IDEX system.
Extruder in FGF version
Pellet extruder
The technology of three-zone heating of pellets inside the extruder ensures uniform material feed and high quality of the printed item.
Extruder in FGF version
Pellet extruder
The technology of three-zone heating of pellets inside the extruder ensures uniform material feed and high quality of the printed item.
printing bed
Quick-change print platform heated to 100°C
The quick-change printing bed makes the printing process fast and easy.
This avoids damage to models with large dimensions, and also allows you to use the printer almost without interruptions between printing processes.
This avoids damage to models with large dimensions, and also allows you to use the printer almost without interruptions between printing processes.
printing bed
Quick-change print platform heated to 100°C
The quick-change printing bed makes the printing process fast and easy.
This avoids damage to models with large dimensions, and also allows you to use the printer almost without interruptions between printing processes.
This avoids damage to models with large dimensions, and also allows you to use the printer almost without interruptions between printing processes.
By clicking the button, you're agreeing to our terms of service.
We design our printers with care and love - from sketch to final product,
so that you can be confident in every layer of printing on F2 printers.
so that you can be confident in every layer of printing on F2 printers.
