F2 Kubo
High-temperature FDM/FFF 3D printer for small batch production.
- UNLIMITED OPPORTUNITIES
- HIGH-TEMPERATURE 3D PRINTER
- UNLIMITED OPPORTUNITIES
- HIGH-TEMPERATURE 3D PRINTER
Extruders
Two high-temperature extruders (up to 550°C) for printing with different materials
Chamber
Heated up to 200°С chamber with forced convection allows printing parts with high-temperature materials
F2 Kubo
High-temperature FDM/FFF 3D printer for small batch production.
Even higher chamber temperature,
even more possibilities.
even more possibilities.
Even higher chamber temperature,
even more possibilities.
even more possibilities.
F2 Kubo
High-temperature 3D printer
for small-scale production
for small-scale production
The F2 Kubo is an FDM/FFF printer with a printable area of 300×300×350 mm. One of the main advantages of the
F2 Kubo is a heated up to 200°С chamber with forced convection allows printing parts with high-temperature materials.
F2 Kubo is a high-temperature FDM/FFF
3D printer (printing area 300*300*350 mm), which solves the problems of small-scale production.
Two high-temperature extruders (up to 550°C) support printing with engineering (ASA, PC, PP, etc.) and composite polymers such as ABS+CF, PEEK+CF, PEEK+GF, etc.
3D printer (printing area 300*300*350 mm), which solves the problems of small-scale production.
Two high-temperature extruders (up to 550°C) support printing with engineering (ASA, PC, PP, etc.) and composite polymers such as ABS+CF, PEEK+CF, PEEK+GF, etc.
Quick-detachable heated printing platform up to 200°C made of stainless steel with calibration and heated up to 200°C chamber with forced convection allows printing parts with high-temperature materials in the entire volume of construction.
The printer has a heated (up to 60°C) cell for two filament spools.
The printer has a heated (up to 60°C) cell for two filament spools.
Diameter of nozzles
0,15 - 1 mm
Chamber
heating up to 200°С
with convection
with convection
Printing area
300*300*350 mm
Heated bed
quick-change printing platform heated to 200°С
User Interface
original electronics
and intuitive interface
and intuitive interface
Extruders
two high-temperature
(up to 550°C)
(up to 550°C)
Diameter of nozzles
0,15 - 1 mm
Chamber
heating up to 200°С
with convection
with convection
Printing area
300*300*350 mm
Heated bed
quick-change printing platform heated to 200°С
User Interface
original electronics
and intuitive interface
and intuitive interface
Extruders
two high-temperature
(up to 550°C)
(up to 550°C)
User Interface
Original electronics and intuitive interface
Minimal training is required; by looking at the interface, you will immediately understand how to operate the printer.
User Interface
Original electronics and intuitive interface
Minimal training is required; by looking at the interface, you will immediately understand how to operate the printer.
printing chamber
Heated chamber with forced convection
Heated up to 200°C chamber with forced convection allows printing parts with high-temperature materials in the entire volume of construction.
printing chamber
Heated chamber with forced convection
Heated up to 200°C chamber with forced convection allows printing parts with high-temperature materials in the entire volume of construction.
EXTRUDERS
Two high temperature extruders allow you to print with a full range of available materials
F2 printing technology provides ultra-fast heating of the extruder to operating temperature in 3-10 seconds with high accuracy of melt maintenance.
EXTRUDERS
Two high temperature extruders allow you to print with a full range of available materials
F2 printing technology provides ultra-fast heating of the extruder to operating temperature in 3-10 seconds with high accuracy of melt maintenance.
By clicking the button, you're agreeing to our terms of service.
