F2 PRINTING TECHNOLOGIES
- FULL CONTROL
- OUTSTANDING QUALITY
- OUTSTANDING QUALITY
F2 PRINTING TECHNOLOGIES
- FULL CONTROL
- OUTSTANDING QUALITY
- OUTSTANDING QUALITY
The company's flagship development are FDM / FFF 3D printing technologies, which significantly increase the printing speed due to an innovative nozzle heating method, as well as developed algorithms for controlling the heating and printing process.
F2 extruder
standart FDM/FFF extruder
heat mass
temperature gradient
max power
inertia
heating to operating temperature
temperature accuracy
water cooling
heavy-duty nozzles made of stainless steel or sapphire
heating speed
materials
20 g.
low
70 W
high
1,1 g.
high
700 W
low
40 - 90 sec.
10 - 15˚С
-
-
3-5 sec.
1-3˚С
250 - 300˚С in 40 - 90 sec.
up to 600˚С in 3 - 5 sec.
PET, SBS, PLA, ABS, FLEX, HIPS, PС, Nylon
composite materials, filled plastics, refractory polymers, continuous fiber
PC/ABS, ABS-ESD, ASA, Nylon12CF, PA66, PA12, Ultem 1010, ULTRAFUSE, Alloy 910, Nylon 6, PPSU, PEEK, PEI, PA6, Ultem 9085, Nyylon 645, PPSF, Nylon12P, PSU
PET, SBS, PLA, ABS, FLEX, HIPS, PС, Nylon
Two high temperature independent or twin extruders
F2 extruders, heated up to 550˚С, ensure the accuracy of maintaining the temperature of the melt up to 3˚С. They warm up to operating temperature in 3-10 seconds.
Quick-change cartridges with different nozzle diameters make printing process simple and fast.
Quick-change cartridges with different nozzle diameters make printing process simple and fast.
Two high temperature independent or twin extruders
F2 extruders, heated up to 550˚С, ensure the accuracy of maintaining the temperature of the melt up to 3˚С. They warm up to operating temperature in 3-10 seconds.
Quick-change cartridges with different nozzle diameters make printing process simple and fast.
Quick-change cartridges with different nozzle diameters make printing process simple and fast.
Heated chamber with forced convection
A unique system for providing the required temperature environment with high uniformity of heating of the entire volume of the chamber with convection is installed in the printing chamber.
The built-in air filtration system traps all unwanted particles and odours, as well as vapors of styrene derivatives, hydrocyanic acid, acetaldehyde, which may evaporate while printing with polymers.
The built-in air filtration system traps all unwanted particles and odours, as well as vapors of styrene derivatives, hydrocyanic acid, acetaldehyde, which may evaporate while printing with polymers.
Heated chamber with forced convection
A unique system for providing the required temperature environment with high uniformity of heating of the entire volume of the chamber with convection is installed in the printing chamber.
The built-in air filtration system traps all unwanted particles and odours, as well as vapors of styrene derivatives, hydrocyanic acid, acetaldehyde, which may evaporate while printing with polymers.
The built-in air filtration system traps all unwanted particles and odours, as well as vapors of styrene derivatives, hydrocyanic acid, acetaldehyde, which may evaporate while printing with polymers.
Quick-detachable beds
The F2 printers have stainless steel heated beds heated up to 160°С.
Quick-detachable beds avoid damaging large dimension printed items and allows you use the printer almost without interruptions between printing processes.
Quick-detachable beds avoid damaging large dimension printed items and allows you use the printer almost without interruptions between printing processes.
Quick-detachable beds
The F2 printers have stainless steel heated beds heated up to 160°С.
Quick-detachable beds avoid damaging large dimension printed items and allows you use the printer almost without interruptions between printing processes.
Quick-detachable beds avoid damaging large dimension printed items and allows you use the printer almost without interruptions between printing processes.
Original electronics and intuitive interface
Minimal training is required; by looking at the interface, you will immediately understand how to operate the printer.
Original electronics and intuitive interface
Minimal training is required; by looking at the interface, you will immediately understand how to operate the printer.
F2 printers
classic FDM/FFF printing with F2 original technology
